Double Glazing Locks Repair
If a double-glazed window does not shut, it creates drafts that allow heat to escape. It also reduces your security measures for your home and puts you at risk of burglary.
Double-glazed window seals, hinges and handles can become damaged over time. If this happens it could affect your windows' functionality and invalidate any warranties you might have.
Locks that aren't working
While a lot of people take great care when installing anti-burglar devices for their gates and doors, it is often overlooked that the windows are prime targets for burglars. Having faulty locks could cause drafts to enter the home, which can allow valuable heat to escape and also weaken the security of your home.
If you're uPVC windows locks do not work, it is likely that the lock mechanism is jammed. This usually occurs because of a crack in the gearbox component. This can cause the handle to not open, but instead to rotate 360 degrees. This is a problem that is common with uPVC windows, but it can also happen in tilt-and-turn windows as well as sliding sash windows.
If this happens, unlock the lock by pressing the lever handle. This can help to unblock the gear box and restore the window's opening. If double glazing repair doesn't work, you may have to replace the window lock mechanism completely.
Most modern uPVC windows use espagnolette locks. These are locking systems inside the window that secure the window using locks that look like mushrooms and are that are inserted into the frame keep. The handle controls the gearbox which then activates the cams, causing them to move up or down. A common issue is when the spindle on the lock has broken which causes the handle to turn freely but not allowing the window to move open or shut.
A malfunctioning transmission may make your window appear to be locked but it's not. This can occur when the centre rods, also known as crocodile tooth fixings, within the gearbox break off. Misty Glaze will supply and install replacement rods if this happens.
It is crucial not to try to force a stuck or broken lock. This could cause the lock to snap or break - particularly with a window made of uPVC because it expands and expands as it warms and cools. It is recommended to contact a professional locksmith who can diagnose the problem and repair it.
Sticky Doors/Window
It is annoying to have windows and doors that don't close, but they may also be indicative of more serious structural problems. It is essential to seek assistance from a professional if you are having difficulty closing or opening a door or window. These problems can be caused by a variety of causes such as foundation settlement or a lack of support in the crawl space.
Windows and doors can stick because of humidity or an issue with the frame itself. When exposed to moisture, wooden frames may begin to warp. Even if the hardware appears great, this could make it difficult to open and close your frames. If this happens the wood expands and presses against the hinges, causing friction.
Rub the window or door with soap to lessen friction if it gets stuck in summer. This will make it less swollen and can resolve the issue temporarily. This method will need to be repeated periodically during periods of high humidity.
Sanding the frame of the door or window to a smooth surface is a more permanent fix. You can do this either by hand or with the power tool. A professional can also sand down and stain or paint your window or door frame to make it appear new again.
If Sanding and soap aren't working it's likely that your issue is caused by foundation settlement or a weak crawl space. The first thing to do is check for cracks around the affected area. It's time for you to consult a foundation specialist when you spot any of these indications. Foundation damage can cause uneven floors, a misaligned wall and doors that are stuck. To avoid the need for costly and risky repairs, it's important to address these problems as soon as they can be addressed. If ignored these issues can escalate to the point that your entire home is structurally unstable. Contact the Southeast's top foundation repair experts today to set up an inspection and repair service!
Cracking/Blowing Issues
When double glazing starts to degrade, it can cause cracks to develop. This can be unsightly and it also allows all the heat that's built up within your home to escape. It also poses a safety risk for your family, as the glass's sharp edges could injure them when they break. It is better to fix double-glazing windows with cracks before they become worse. This will increase the cost of replacement.
Window seals are essential to stop drafts from entering the home and keep air between the window panes. However, as time passes, these will deteriorate or shrink due to changes in weather conditions. Unchecked, it can cause condensation, moisture and draughts inside your home.
This issue is usually resolved by a professional. They can replace the seal on your window and bring your windows back to their original state. They will also suggest other features that can reduce the possibility of a stress crack forming in the future, for example trickle vents to improve ventilation.
It is also possible to lubricate the handles and hinges of your windows and door. This will help them to move more smoothly and will allow the lock to function as it should. Apply lubricating oil to a lint-free cloth and rub it into the hinges and handle mechanism as well as places that they pass through the frame (for example, windows with sash). It is also beneficial to remove the handles from the frames and wash them by using warm water to rid them of any dirt or grit that has become stuck to them.
If your uPVC doors and windows aren't functioning in the way they should, it is crucial to contact an expert to fix them. They will be able to identify the problem quickly and resolve the issue in a short period of time. It is a lot cheaper and more secure than trying to do it yourself and possibly damaging the mechanisms. It will also give you peace of mind knowing your home is safe and secure.